Télécharger Imprimer la page

Ryobi RYi2000GRA Manuel D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

SYMBOLS
ENGINE LUBRICANT WARNING
You must add lubricant before first op-
erating the generator. Always check the
lubricant level before each operation. The
lubricant level should always register be-
tween the hatched areas on the dipstick.
The unit is equipped with a sensor which
will automatically shut off the engine if the
lubricant level falls below a safe limit.
FUEL CAP WARNING
Never remove fuel cap when unit is running. Shut off engine and allow the unit
to cool at least five minutes. Remove cap slowly to release any pressure built
up in the fuel system and to avoid the heat from the muffler igniting fuel vapors.
GROUNDING WARNING
This generator does not include a
ground rod or copper wire. Call a
qualified electrician for local grounding
requirements.
HOT SURFACE WARNING
Do not touch the muffler or aluminum cylinder of the engine. They are very
HOT and will cause severe burns. Don't put body parts or any flammable or
combustible materials in the direct path of the exhaust.
SPARK ARRESTOR
Operation of this equipment may create sparks that can
start fires around dry vegetation. A spark arrestor may
be required. The operator should contact local fire agen-
cies for laws or regulations relating to fire prevention
requirements.
STORAGE NOTICE
Always store the generator standing on its feet. Never store the unit on its side
or in a vertical position.
CLEARANCE WARNING
While operating and storing, keep at least 3 feet of clearance on all sides of this
product, including overhead. Allow a minimum of 30 minutes of "cool down" time
before storage. Heat created by muffler and exhaust gases could be hot enough
to cause serious burns and/or ignite combustible objects.
7 — English

Publicité

loading