40001594.qxd
06/09/2004
Cancelling and resetting
the programme
To cancel a programme press the START
for 5 seconds. The machine will indicate that it
has been reset by the START indicator flashing. It
is possible to change the programme within the
first 10 minutes without using the cancel and
reset function.
Cleaning and Routine
Maintenance
Cleaning the dryer
●
Clean the filter and empty the water
container after every drying cycle.
●
Regularly clean the condenser.
●
After each period of use, wipe the inside of
the drum and leave the door open for a
while to allow circulation of air to dry it.
●
Wipe the outside of the machine and the
door with a soft cloth.
●
DO NOT use abrasive pads or cleaning
agents.
●
To prevent the door sticking or the build up
of fluff periodically clean the inner door and
gasket with a damp cloth.
Technical specifications
Drum capacity
Maximum load
Height
Width
Depth
Energy Label Band
10:17
Page 17
115 litres
6 kg
85cm
60cm
60cm
C
button
IMPORTANT
Always switch
off and remove
the plug from
the electricity
supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on
the front of the
dryer cabinet
(with the door
open).
17