Hoover NEXTRA HNC260 Manuel D'instructions page 11

40001594.qxd 06/09/2004 10:17 Page 11
Controls and indicators
FILTER CARE
COUNTDOWN
INDICATOR
DISPLAY
EMPTY ON/OFF PROGRAMME
ACRYLICS/ START
WATER BUTTON SELECTOR
SYNTHETICS BUTTON
INDICATOR
BUTTON
Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light
START – Press START to commence the selected drying programme. Press
for 5 seconds to cancel/reset the programme
Acrylics/Synthetics button – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
Empty Water indicator – lights when the water container is full
Filter Care indicator – lights when the filter needs cleaning
COUNTDOWN display
START – When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion
of the programme
15' - Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool Down phase
STOP - Indicator lights when the programme is finished.
11