Publicité
Les langues disponibles
Les langues disponibles
EN
TECHNICAL DATA
Minimum dynamic pressure: 0.5 bar
Maximum operational pressure: 5 bar
Recommended operational pressure: 1-5 bar
It's recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature: 80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fine in time, must ensure compliance with the
mode of installation and maintenance described in this booklet. Relying on a qualified plumber.
Make sure that the system is free from all debris and impurities existing.
INSTALLATION
Fig. 1: Drill a hole in the worktop (MIN Ø35 mm - 1.37 in, MAX Ø38 mm - 1.5 in). Insert the rod
of the spout, placing the gasket under it. Secure the spout with the appropriate fixing kit.
Fig. 2: Make two holes for the handles on the worktop (MIN Ø30 mm - 1.18 in, MAX Ø34 mm -
1.33 in). Mount the fixing set on the base. Insert the base into the hole from under the worktop.
Screw the upper rosette inserting the gasket. Make sure the rosette is fully screwed. Secure
everything with the appropriate fixing kit.
Fig. 3: Insert the square ring with the two rods inside the rosette, insert the second square
ring. Place the square handle on the broach and align the square surfaces. Remove the handle.
Screw the hexagonal insert. Insert the square handle on the broach.
Fig. 4: Lock the handle using the screw. Insert the two rods and the square plug
Fig. 5: Screw the hose onto the rod of the spout
Fig. 6: Screw the hose to the base, inserting the gasket
After connecting the body to the system, turn on the stopcocks and check that the mixer tap
unit operates correctly. Keep the tap pressurised for a few minutes checking eventual leaks.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and
dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid
detergents which contain corrosive or acidic substances, abrasive sponges, swab with metallic
strings because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE
IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.
Publicité
