Abus HDCC42500 Manuel Utilisateur page 27

4. Camera description
1 IR LEDs
2 Lens
3 Camera housing with sun shade
4 Camera mount
5 Connecting cable with function: True WDR on/off
6 Analogue video output (BNC, for service purposes, labelled 'CVBS', only
when WDR is off)
7 Power supply connection (5.5 x 2.1 mm, barrel connector)
8 HD-TVI video output (BNC, labelled 'TVI')
5. Mounting/installation
5.1. Mounting the camera
IMPORTANT!
The camera must be disconnected from the power supply during installation.
Use screw anchors and screws that are appropriate to the surface to fix the camera in place. Drill
appropriately sized holes for the screw anchors used. An opening is provided on the base plate of the
camera mount for cabling at the side.
27
English