Outside Living Industries ubbink 7524507 Notice De Montage page 18

smooth and level.
SUMMARY:
Make sure that they are placed in the correct position.
not tighten up.
To imperatively check alignment of wedges (chalk line) and diagonals (10 m ribbon); A = B
Mark in the position of the holes with paint or felt tip pen.
nozzle and the skimmer
Remove the post and its plinth, drill the holes, reposition, drive in the anchoring pins and tighten. Repeat the process on each plinth.
to not protrude.
7
17
NOTICE 350x505 - H126-2017.indd 18 09.12.16 12:48