Publicité
Les langues disponibles
Les langues disponibles
Connections
You can connect various external devices to the TV.
For more information on external device's connection,
refer to the manual provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
• Complete all connections between devices, and
then connect the power cord to the power outlet to
prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• This TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed.
(Depending upon model)
12
Other connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external device
and the TV with the HDMI cable.
HDMI
• Supported HDMI Audio format:
(Depending upon model)
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz
/ 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• DTV Audio Supported Codec: MPEG, Dolby Digital
•
(Settings)
[General] [Devices] [HDMI
Settings] [HDMI Deep Color]
Frame Rate
Resolution
(Hz)
3840 x 2160p
50
4096 x 2160p
59.94
60
If the device connected to Input Port also supports
HDMI Deep Color, your picture may be clearer.
However, if the device doesn't support it, it may not
work properly. In that case, change the TV's [HDMI
Deep Color] setting to off.
- This feature is available only on certain models
which support HDMI Deep Color.
On
4:4:4
8 bit
4:2:2
8/10/12 bit
4:2:0
10/12 bit
Off
4:2:0
8 bit
Publicité
