Télécharger Imprimer la page

Oceanic OCEATG4S1 Notice D'utilisation page 29

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
non-domestic use, in a commercial environment or for
heating a room.
• This appliance is not connected to a ventilation
device. It shall be installed and connected in
accordance with current installation regulations.
Particular attention should be given to the relevant
requirements regarding ventilation.
• If the burner has not lit after 15 seconds, stop
operating the device and open the compartment
door. Wait at least 1 minute before attempting to
ignite the burner again.
• These instructions are only valid if the correct
country symbol appears on the appliance. If the
symbol does not appear on the appliance, refer to
the technical instructions which describe how to
modify the appliance to match the conditions of use
of the country.
• All possible measures have been taken to ensure
your safety. Since the glass may break, care should
be taken when cleaning. Avoid hitting or knocking
the glass with accessories.
• Make sure that the supply cord is not trapped or
damaged during installation. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to prevent a hazard.
• If your appliance is provided with a cooking hotplate
made of glass or glass ceramic:
CAUTION: "In case of hotplate glass breakage":
- immediately shut off all burners and any
electrical heating elements and isolate the appliance
from the power supply,
- do not touch the appliance surface,
- do not use the appliance.
EN - 6

Publicité

loading

Ce manuel est également adapté pour:

Oceactg4eb1Oceactg4ew1