Publicité
Les langues disponibles
Les langues disponibles
Intensive freezing (FastFreeze)
This appliance has an intensive freezing function. This function decreases the temperature in the
freezer compartment as quickly as possible. Activate this function 24 hours before you put a large
quantity of fresh food in the appliance.
WARNING!
When the intensive freezing function is selected, the appliance works at maximum capacity. It
may then make more noise for a while.
INFORMATION!
If the function is not deactivated manually, it will be deactivated automatically after approximately
two days. The temperature returns to the most recently set value (the most recent setting appears
on display B, but the dial remains in the position
Open door alarm
WARNING!
If the door is open for more than 10 minutes, the alarm turns off automatically and the set
temperature value appears on the display. The appliance continues to operate with the set values.
High temperature alarm
A high temperature can be caused by several reasons:
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
•
Switching on the intensive freezing: Rotate the A dial to
position
.
•
When the intensive freezing function is active, the B display indicates
FF.
•
After the end of the intensive freezing cycle, rotate the A dial back
to the desired setting.
If the door of the appliance is open for more than 1 minute, the symbol
"do" will appear on display B.
The alarm can be canceled by closing the door.
A signal will sound when the temperature in the appliance is too high.
The set temperature shown in the display and the LED lighting will flash.
).
17
Publicité
