Télécharger Imprimer la page

Flama 1319FL Manuel D'instructions page 31

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
ANOMALY
The appliance does not
turn on.
Poor performance.
Little dehumidifying
capacity.
Noise.
E2
LO
Oi
CI
Ch
PROBABLE CAUSE
It is not connected to a
power source.
The water tank is full.
The water tank is not
correctly placed.
Temperature < 5°C or
> 35°C.
The air filter is clogged.
The intake or outlet
ducts are obstructed.
Dirty air filter.
Air intake or outlet
blocked.
The appliance is
unstable.
The air filter is clogged.
Humidity sensor.
Ambient humidity
below 20%.
Ambient humidity
above 90%.
Protection against low
temperature.
Protection against high
temperature.
English
SOLUTION
Plug it into the wall outlet.
Empty the water tank.
Reposition the water tank.
Appliance protection.
Clean the air filter.
Remove the obstruction from the
intake or outlet ducts.
Clean the filter.
Unblock the air intake or outlet.
Check that the appliance is in a
stable position.
Clean the air filter.
Contact technical assistance.
The dehumidifier turns off to
protect itself.
29

Publicité

loading

Produits Connexes pour Flama 1319FL