Technical Data - Expondo PHYSA ULTIME Manuel D'utilisation

The operation manual must be reviewed.
Never dispose of electrical equipment together
with household waste.
This machine conforms to the CE declarations.
For indoor use only.
This is a device of the 2nd protection class.
Do not use in very humid premises or if there
is a risk of direct contact with water or if water
condensation occurs.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other language
versions are translations from German.
USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure
the compliance with the safety instructions when using this
device. Please read the instructions carefully and make sure
that you have understood them well. Keep the manual near
the equipment to be able to read it at any time. Always
use current sources which are connected to the ground and
which provide the necessary voltage (this info is indicated
on the label on the device). If you have any doubts, let an
electrician check that your outlet is properly grounded.
Never use a damaged power cable. Do not open the unit
in damp or wet environment, or if your hands or body are
damped or wet. Protect the unit from solar radiation. Use
the device in a protected location to avoid damaging the
equipment or endangering others. Make sure the device is
able to cool and avoid placing it too close to other devices
that produce heat. Before cleaning the device, disconnect it
from the power source. Use a soft damp cloth for cleaning.
Avoid using detergents and make sure that no liquid enters
the unit. No internal element of this device needs to be
maintained by the user. Opening the device without our
approval leads to a loss of warranty!
SAFETY GUIDELINES
1. Please read and understand these instructions
carefully before operating the device! Please observe
the safety guidelines carefully in order to prevent
damages through improper use!
2. Please keep this manual available for future
reference. If this device is passed on to third parties,
the manual must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting
from improper use or incorrect operation.
5. Before the first use, check whether the main voltage
type and current comply with the indicated data on
the type plate.
6. This device is not intended to be used by persons
(including children) with limited physical, sensory or
mental aptitude, as well as lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or if they have received
instructions as to how the device is used.
U S E R M A N U A L
7. ELECTRIC SHOCK HAZARD! Do not attempt to repair
the unit yourself. In case of device failures, repairs
must be done by qualified experts.
8. Please check the main plug and the power cable
regularly. If the power cable for this device is
damaged, it has to be replaced by the manufacturer
or its customer service or another qualified person in
order to prevent hazards
9. Prevent damages to the power cable by avoiding
squeezing or bending it or rubbing it on sharp
edges. Also keep the power cable away from hot
surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
11. Under no circumstances should the housing be
opened.
12. Some parts of the device can get extremely hot. To
avoid any injuries, be careful by every contact with
the device.
13. Do not use in very humid premises or in direct
vicinity of water tanks.
14. Prevent the device from getting wet. Risk of electric
shock!
15. Do not cover air inlets / outlets.

TECHNICAL DATA

Product name Hair dryer
Model Ultime PILIH PURUS SICCO
Rated voltage [V] 230~ 230~ 230~ 230~
Frequency [Hz] 50 50 50 50
Rated power [W] 700 1600 1200 1200
Max. drying 54 68 70 58
temperature [°C]
Noise level [dB] 70 73 78 74
Protection class IPX4 IPX4 IPX4 IPX4
Air speed [m/s] 13 16 14 15
Weight [kg] 1,75 0,75 0,65 0,75
SCOPE OF APPLICATION
The hair dryer is designed for drying hair under an air
stream.
The user is liable for any damage resulting from non
-intended use of the device!
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for
integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3
days, and document the damages as detailed as possible.
Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and
stable.
Rev. 13.09.2017
6
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic
tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate
condition!
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
The temperature of the environment must not exceed 45°C
and the relative humidity should not exceed 85%. Ensure
good ventilation in the room in which the device is used.
The distance from any wall of the device should be not less
than 10 cm. Install the device making sure that constant
access to the main plug is ensured. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details!
PRINCIPLE OF OPERATION
Ultime
1
2
3
7
4
1. mounting bracket
2. housing
5
3. Nozzle cradle
4. air speed
adjustment knob
6
5. nozzle
6. pipe
7. shaver socket
Once the nozzle is removed from its cradle, the device will
activate automatically. Use the air speed adjustment knob
to set the air speed. Once the nozzle is placed in its cradle
the device will switch off automatically.
ATTENTION! The nozzle heats up when in use, avoid direct
skin contact to prevent burning!
PILIH
1
3 1. housing
2. base
3. dryer air flow
2 adjustment button:
4 1 –hot air
2 – warm air
5
C – cold air
4. air flow trigger
5. ON / OFF switch
PURUS
1
2
3
4
5
1. dryer
6 2. housing
3. air flow selection
switch
4. air flow trigger
5. mounting panel
6. ON / OFF switch
Rev. 13.09.2017
SICCO
1
1. dryer
2
2. air flow trigger
3. air flow selection
3
switch
4
4. housing
5. shaver socket
5
6. mounting panel
6 7. ON / OFF switch
(under the dryer
7
handle)
Applicable to PILIH, PURUS and SICCO models:
In order to activate the device press the ON / OFF switch,
then remove the dryer from the base, select the required air
flow using the sir flow selection button, press and hold the
air flow trigger After drying release the air flow trigger, the
device will switch off automatically, place the dryer in the
base. After use turn the dryer off using the ON/OFF switch.
ATTENTION! The nozzle heats up when in use, avoid direct
skin contact to prevent burning!
ASSEMBLING THE DEVICE
Ultime
Remove the mounting bracket cover. Then measure and
drill two holes (ɸ6 mm and 35 mm deep) 267 mm apart.
Attach the plastic bracket to the bottom hole and slide the
dryer over it. Then screw the dryer to the top hole using
a screw and attach the mounting bracket cover.
ATTENTION! The dryer should be mounted at least 140 cm
from the floor.
PILIH
Drill two holes (ɸ6 mm) 101 mm apart. Attach the plastic
bracket to the top hole and slide the dryer over it. Attach
the dryer using the second plug in the bottom part of the
device.
7