Inspire MIRASOL YF4248-BK Manuel D'instructions page 22

5. Appliance speci cations
FR
TECHNICAL CHARACTERISTICS
Rated voltage
ES
Adaptor
Rated wattage
Ambient Temperature
PT
Protection
IP number
IT
This product contains a light source of energy efficiency class <D> - (EU) 2019/2015
6. Maintenance / Cleaning
Disconnect from mains before maintenance or cleaning.
EL
The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
PL
WARNING: The use of any accessory not speci ed in this manual may present a risk of
personal injury.
7. Others (Service, Repairing, Guarantee, etc.)
RO
Have your product repaired by a qualified person.
This electric product is in accordance with the relevant safety requirements.
UA
Repairs should only be carried out by qualified persons using original spare parts, otherwise This may
result in considerable danger to the user.
Please contact the store which you bought the product for after sale services if any.
EN
Warning: the product must be connected to power supply which is provided by manufacture.
After assembly step, rewind the wire 7 turns. Ensure that the internal cable does not exceed 360
degrees after installation.
The product is SELV class III lamp with approved class II LED driver.
DC 24V
CLASS II INPUT:220V-240V ~50/60Hz 0.4A
Max.18W
25°C
class III
IP 20
22