Hz
IP21
COMPLETE ASPIRATION JAR 1000ml
TUBES SET 6mm x 10mm (TRASPARENT SILICON)
ANTIBACTERIAL AND HYDROPHOBIC FILTER
The filter is produced with (PTFE) hydrophobic material to prevent fluids entering the pneumatic circuit. It should be changed
immediately if it becomes wet or if there is any sign of contamination or discolouration. If should also be changed if the unit is used
with a patient whose risk of contamination is unknown. Don't use the suction unit without the protection filter. If the suction
unit is used in an emergency or in a patient where the risk of contamination is not know the filter must be changed after each use.
Available under request with different versions with complete jar 2000ml.
Suction catheter: Single-use device to be used on a single patient. Do not wash or re-sterilize after use. Reuse may cause cross-
infections. Don't use after lapse of the sell-by date
~
I
0
ACCESSORIES SUPPLIES
DESCRIPTION
CONICAL FITTING
ASPIRATION PROBE CH20
SYMBOLS
Class 2 isolation equipment
CE marking in conformity with EC directive 93/42/CEE and subsequent
General warnings and/or specifications
Consult the instruction manual
Fabbricante: CA-MI S.r.l.
Via Ugo La Malfa nr.13 – Frazione Pilastro
43013 Langhirano (PR) Italia
Applied Part type BF (suction probe)
Keep in a cool, dry place
Conservation temperature: - 25 ÷ 70° C
Model / Ref number
Degree of protection an electrical device provides in the case of
accidental or intentional contact with the human body or with objects,
and protection in the case of contact with water.
1st DIGIT
PENETRATION OF SOLIDS
Protected against solids having a
dimension greater than Ø 12mm
Atmospheric Pressure
14
changes
Fuse
Alternate current
Mains frequency
ON
OFF
Batch production
Serial number
2nd DIGIT
PENETRATION OF LIQUIDS
Protected against the vertical
flow of drops of water
CODE
RE 210001/02
RE 210410
51100
25723
SP 0046
GB