Philips Sonicare HX3866/43 Manuel D'utilisation page 11

Intensities
Getting Started
Charging your Cordless Power Flosser
Your Cordless Power Flosser comes with three
different intensity settings. To change the intensity to
the setting you prefer, press the intensity button.
Note: It is recommended to start using this Power
Flosser on the lowest intensity and increase the
intensity over the course of a few weeks.
Gently pull and rotate the charging port cover on
1
the back of the Cordless Power Flosser to expose
the charging port .
2 Plug the USB-C charging cable into the USB-C
charging port on the back of the Cordless Power
Flosser.
Note: Make sure the handle is completely dry
before you connect the USB-C cable.
3 Connect the USB cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.
4 The battery indicator flashes while charging (see
'Charging').
Note: It can take up to 8 hours to fully charge the
battery, but you can use the Cordless Power Flosser
before it is fully charged.
Note: Replace the charging port cover on the Cordless
Power Flosser when not actively charging.
11
English