Publicité
Les langues disponibles
Les langues disponibles
Josef Kihlberg JK20A680L
TABLE OF CONTENTS
1 Technical data
2 General information
2.1 Information on environmental protection
3 Safety instructions
4 Description
4.1 Design
4.2 Function
5 Initial operation
5.1 Installation
5.2 Compressed-air connection / Lubrication
6 Operating instructions
6.1 Loading the stapler
6.2 Operating the stapler
7 Preventive and corrective maintenance
7.1 Cleaning the stapler
7.2 Removing jammed staples
7.3 Replace feed spring or pusher
7.4 Replace driver blade
8 Trouble shooting
9 Spare parts kit
10 Exploded drawing
Parts list with recommended wear parts 44
SE JOSEF KIHLBERG AB
Industrigatan 37B
SE- 544 50 Hjo
Telephone: +46 503 328 00
Fax:
+46 503 328 01
E-mail:
reception@kihlberg.se
Internet:
www.kihlberg.com
We take sole responsibility for declaring that the
stapler JK20A680L, to which this declaration refers,
is in full compliance with the current require-
ments of the guidelines laid down by the council
on 17th May 2006 (2006/42/EC) "Machine
Guidelines".
According to norm:
ISO 12100:2010; EN 792-13+A1:2008
2
1
Page
2
Weight
3
Dimensions
3
4
5
Magazine capacity
5
Staple leg length
5
Nose length
6
6
Recommended
working air pressure
6
7
Max. air pressure
7
Air consumption
7
per driving operation at
6 bar operating pressure
8
8
Noise characteristic levels
according to:
8
9
A-weighted single-event
emission sound pressure
9
level at work station
10
A-weighted sound
41
energy level
42
Vibration level:
FASTENERS
Staple JK680-06 (1/4")
Staple JK680-08 (5/16")
Staple JK680-10 (3/8")
Staple JK680-12 (1/2")
Staple JK680-14 (9/16")
DECLARATION OF CONFORMITY
TECHNICAL DATA
SE-544 50 HJO, 05.05.2020
Plant Manager:
Thor-Björn Elmers
Agent for the publication of technical documentation:
Josef Kihlberg AB, Industrigatan 37B, SE-544 50 HJO
1.2 kg (2.6 lbs)
Length 365 mm (14,4")
Width
43 mm (1,7")
Height 150 mm (5,9")
286 staples
6–14 mm (1/4"–9/16")
14 mm (0.5 in.)
5–6 bar (72–87 psi)
7 bar (100 psi)
0.2 litres
EN 12549
85 dB
91 dB
Vibration below the limit of
declaration according to
EN 792-13 measured
according to ISO 8662-11.
Art.No 400283
Art.No 400285
Art.No 400288
Art.No 400292
Art.No 400294
05.20
Publicité
