Kenwood TFM400 Manuel D'instructions page 7

troubleshooting guide
Problem
Toaster does not
operate.
Carriage lever not staying
down
Uneven Browning.
Toast colour too light or
too dark.
Burning smell or smoke
from slots.
If none of the above see "Service & Customer Care".
English
Cause
No power.
Toaster not plugged in.
1 Slice of bread being
toasted.
Bread slices of different
size, freshness or
thickness being toasted
at same time.
Wrong browning setting
used.
Crumb tray full.
Food particles stuck
to element or loose in
toasting slots.
7
Solution
Check toaster is plugged
in.
Check the fuse/circuit
breaker in your home.
The lever will not stay
down unless the toaster
is plugged in.
For best results ensure
that the bread slices are
of an even thickness,
freshness and size.
In order to achieve
uniform browning we
recommend you wait a
minimum of 30 seconds
between each toasting
so that the control can
automatically reset.
Alternatively select a
lower setting when
additional toasting is
carried out.
Select a higher or lower
browning setting.
Refer to "hint" section.
Unplug before checking
the slots.
Remove any loose food
particles.
Remove and clean the
crumb tray.