Kenwood TFM400 Manuel D'instructions page 5

Defrost position
To defrost frozen bread, select the
l
defrost position on the browning
control.
To toast a single slice of bread, place
l
the bread into the
the desired browning setting and
lower the carriage lever. Press the
button and it will illuminate.
Bagel (B)
To toast bagels the cut face should
l
be facing the centre elements. Select
the desired browning setting and
lower the carriage lever. Press the
'Bagel' button and it will illuminate.
Note: when toasting using the bagel
l
button, the centre elements will toast
with a higher heat than the element
at the front and back of the toaster.
This will result in only one
side of the item being toasted.
Reheat
To warm toast that has popped up
l
but gone cold, lower the toast then
press the 'reheat' button. The'reheat'
button will illuminate.
hints on using your
toaster
Select a lower setting for light
l
browning or for dry bread.
When toasting a single slice of
l
bread, you may notice a variation
in toast colour from one side to the
other - this is normal.
Dry/stale bread toasts more quickly
l
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that
l
the bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
l
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
(A)
. Select
warming rack safety
Never touch hot surfaces
l
especially the metal top area.
1 Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you are using the toaster slots,
always remove the warming rack so
it cannot burn you.
to use the warming rack
(if supplied)
1 Place the warming rack on top of
toaster 3. It must be fitted either
over the two left hand slots or two
right hand slots, never in the middle.
2 Put your bread items on top of the
rack (slicing thick items in half will
speed up the warming process).
3 Set the browning control no higher
than
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they do not
burn.
5 To remove the warming rack, allow
the toaster to cool and unplug. Lift
off the warming rack 4.
care and cleaning
1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray 5. Clean,
then replace. Do this regularly:
crumbs can smoke or even burn.
Do not dishwash the crumb
tray.
3 Wipe the outside of the toaster and
the warming rack with a damp cloth,
then dry. Do not use abrasives.
5
when using the
. Lower the lever.