Nikro Industries PS600 Mode D'emploi page 8

Nikro Air Scrubbers are warranted for 1 year from the date delivered to the original end
user and may not be assigned or transferred.
Parts, which become defective due to faulty workmanship or materials during normal
use in this period will be repaired or exchanged at no charge if returned and approved
by an authorized Nikro service center. All replaced or repaired parts shall only be
warranted for the remainder of the original one year warranty period.
After the expiration of the one year warranty, all warranties on this unit including fitness
for a proposed usage or purpose will become void.
The end user shall be responsible for freight charges incurred to deliver warranted
product to an approved Nikro service center. Nikro shall be responsible for freight
charges incurred in returning unit to customer, but not to exceed the original freight
charges to customer.
It shall be wholly Nikro's decision to repair, replace or refund the purchase price of any
such defective goods.
This warranty does not apply to normal wear and tear, neglect, misuse, abuse or
incorrect installation. If any other replacement parts, filters or attachments are used
other than original Nikro parts, this warranty will become void.
Nikro disclaims responsibility for loss of production, profits, goodwill or any other costs
that may indirectly occur due to the failure of this product.
H.E.P.A. FILTER STANDARDS AND CERTIFICATION
All Nikro H.E.P.A. filters are manufactured and individually tested using the MIL-STD
282 D.O.P. test, or the IEST-RP-CC-001.3 test method.
Each filter is tested and certified to have a minimum efficiency of 99.97% @ 0.3 micron
particles. All filters are then individually labeled and registered by the manufacturer.
All H.E.P.A. filters used in Nikro equipment meet, and in most cases, exceed the
minimum standard of 99.97% efficiency @ 0.3 micron particles, and comply with OSHA
and EPA standards for cleaning the air of toxic and nuisance dust such as mold, lead
and asbestos.
WARRANTY
ELECTRICAL CERTIFICATION
ETL LISTED
CONFORMS TO UL STD 507
CERTIFIED TO CAN/CSA STD C22.2 NO. 113
8