Publicité
Les langues disponibles
Les langues disponibles
List of materials
Removing the packaging.
I
CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I
WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
Single blower motor assembly
6x80 mm
6x16 mm
3.5x9.5 mm
4.2x19 mm
Drip tray screws
Drip tray bracket
Drip tray
Parts not supplied
Tools/Materials required
• Level
• Drill with 1
⁄
" (3.0 cm),
1
4
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
• Phillips
• Flat-blade
6
Pieces
30": 2
30", 36": 1
48": 2
30", 36": 2
48": 3
⁄
" (3.0 mm),
⁄
" (4.8 mm) drill bits
1
1
8
16
1
10" round air transition
Dual blower motor assembly
4
Ø 6.4x11 mm washers
5
Ø 5.3x20 mm washers
4
10x50 mm wall anchors
6
Torx 20 adapter
4
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Supplied Part
Grease filters
Pieces
1
36", 48": 1
5
2
2
1
30", 36": 2
48": 3
Publicité
