Télécharger Imprimer la page

Dometic BUTTNER MT75MCSlim Instructions De Montage Et De Service page 13

Masquer les pouces Voir aussi pour BUTTNER MT75MCSlim:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Connecting the solar charge controller
You find the information on installing
the solar charge controller in the
enclosed installation and operating
manual or online at
http://qr.dometic.com/beEcxd
!
Also observe the instructions and safety
precautions for all other components used
in the solar system.
Operation
For optimal use of the solar system, note the follow-
ing:
• The solar system generates different amounts of
electricity depending on the amount of sunlight
during the day. The more sunlight falls on the
solar system, the more electricity is generated.
The amount of electricity generated is affected
by the following conditions:
– Cloudy weather
– Seasonal solar radiation
– Variations in the angle of the sun
– Shading or soiling of the solar system
• The performance of the solar system decreases
the more the solar panels heat up. Ensure ade-
quate ventilation and avoid excessive solar radi-
ation.
EN
Cleaning and maintenance
!
WARNING! Electrocution hazard
Broken solar panel glass may cause elec-
tric shock or fire. These panels cannot be
repaired and should be replaced imme-
diately. Contact an authorized service
agent.
!
CAUTION! Risk of injury
Allow the solar panel to cool down
before cleaning to avoid burns or dam-
age to the solar panel as a result of exces-
sive temperature differences. Clean the
solar panels in the early morning or late
afternoon hours when the sunlight is low
and the solar panels are cooler.
A
NOTICE! Damage hazard
• Do not clean the solar system with a
high-pressure cleaner.
• Do not use sharp or hard objects, abra-
sive cleaning agents or bleach during
cleaning as these can damage the
device.
➤Regularly check live cables for insulation faults,
breaks, rodent damage, weathering and that all
connections are tight and corrosion free.
➤Regularly check the surface of the solar panels
for cracks and missing or defective components.
➤For maximum performance keep the solar panel
free of dirt and shading, e.g. dust and
leaves.Clean the solar panels with a soft, damp
cloth or sponge.
➤Regularly remove accumulated dirt near and
under the solar panels.
➤Occasionally check the sealing of the roof duct
for any damage.
4445103705
13

Publicité

loading

Ce manuel est également adapté pour:

Buttner mt150-2mcslimButtner mt80mcButtner mt160-2mcButtner mt110mcButtner mt220-2mcButtner mt140mc ... Afficher tout