DURAVIT C11010 001U 10 Notice De Montage Et D'utilisation page 7

5
> Assemble the O-ring over the hoses and
then place the spout assembly into center
opening in sink.
> Install the wahsers and securing nut onto
the spout body from underneath.
7
70
Leakage through wrong
NOTICE
installed hoses
> Make sure that hoses are not kinked or
twisted during installation.
6
> Tighten the screws maximum torque
5 ft-lbs.
8
The hot valves can cause
CAUTION
scalding
> Avoid contact.
> Attach supply lines to shutoff valves.
7 Nm / 5 ft-lbs.
7
MAL_57159/19.03.2