Télécharger Imprimer la page

Greencut GS400L Manuel D'utilisation page 55

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ELECTRICAL SAFETY
Never modify the plug in any way. Unchanged pins and matching bases will reduce the risk of electric shock. If
any damage is discovered, send your machine to the Official Technical Service.
Do not open or attempt to repair the battery or battery charger.
Protect the battery and charger from moisture. Keep the battery away from extreme heat and cold.
Only charge the battery at an ambient temperature (surrounding air) between 0°C and 40°C.
Do not use the cable to carry, lift or unplug the charger. Keep the cable away from heat, oil, sharp edges or
moving parts. Damaged or tangled cables increase the risk of electric shock.
Do not operate the battery charger outdoors.
When not in use or before cleaning and repairing, disconnect the charger from the power supply. Take special
care with the battery.
Store the battery in a dry place between 10ºC and 30ºC when not in use.
This battery is sealed and must never leak liquid. If the seal becomes damaged and the liquid touches your skin
quickly, wash with plenty of soap and water, neutralize the liquid with a weak acid such as lemon or vinegar and
go to your medical center urgently. If liquid from the battery touches your eyes, flush them thoroughly with water
for 10 minutes and call for immediate medical attention.
The battery should be recharged when it does not produce enough power in the work that was easily done
before. Do not continue to use the product with its battery depleted.
The battery is not fully charged at the factory, before attempting to use it, fully charge it first.
SERVICE
Have the product checked regularly by a qualified technician and use only original replacement parts. If you have
any questions, please contact the Official Technical Service.
55
EN

Publicité

loading