Publicité
Recipes
Recipe
Ingredients
Flour
Soft dough
Water
Salt
Recipe
Ingredients
Semi-sweet chocolate chips
Butter
Confectioners' sugar
Milk
Chocolate butter
Vanilla extract
cream frosting
1. Melt the chocolate and keep warm.
2. Add softened butter into the bowl and beat until the butter become creamy.
3. Add milk and sugar into the bowl and beat together with butter until the mixture become creamy and fluffy.
4. After that, put the melted chocolate into the bowl and mix with plastic beater to get a good mixture.
Troubleshooting
Troubleshooting
Problem
The motor slows down
during operation.
The motor does not work.
The appliance vibrates/
moves during operation.
The attachment scrapes
the Stainless steel bowl
during operation.
The Work light and Power
indicator light flashes on
and off.
Disposal
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and
human health and to recycle waste of
electrical and electronic appliances.
KM6xxx_Ultramix Professional_AEG.indd 33
Hooks function quantities and Processing Times
Flex edge beater function quantities and processing times
Possible cause
Amount of dough may exceed maximum
capacity.
Dough may be too wet, it sticks onto the side
of the bowl.
The appliance is not connected to the mains.
The rubber feet are wet.
Too high setting on the speed selector.
It is normal for heavy loads (e.g heavy dough,
cheese).
The height of the attachment shaft is incor-
rect.
The Speed selector has been left turned on.
This marking indicates that this
product should not be disposed
with other household wastes
throughout the EU. To prevent pos-
sible harm to the environment or hu-
man health from uncontrolled waste
disposal, recycle it responsibly to pro-
Quantity Unit
Time
2,0
kg
1430
g
180-240 s
3
tsp
Quantity Unit
Time
250
g
117
g
432
g
200-300 s
5
tbs
1/2
tsp
Method
Solution
Remove half and process in two batches.
Add more flour, 1 tablespoon at a time until
the motor speeds up. Process until dough
cleans the side of the bowl.
Make sure to plug in the appliance before
operation.
Make sure the rubber feet at the bottom of
the unit are clean and dry.
Lower the speed setting.
Remove half and process in two batches.
Adjust the height of the attachment shaft.
Turn the Speed selector to "Arrest".
mote the sustainable reuse of material
resources. To return your used device,
please use the return and collection
systems or contact the retailer where
the product was purchased. They can
take this product for environmental
safe recycling.
Speed
D
Low setting
(speed 1 for 30 sec,
GR
speed 3 until ready)
NL
F
Speed
Medium setting
GB
(4 - 6 setting)
33
2016-04-06 15:14:20
Publicité
