Télécharger Imprimer la page

AEG Ultramix Professional KM6100 Mode D'emploi page 27

Publicité

Before first use
1. Before using your appliance,
GB
remove all packing material, plastic,
labels, stickers or tags that may be
attached to the motor base, bowls or
attachments.
Warning! Never immerse the
housing, plug, or cord in water or any
other fluid.
Caution! Switch off the appliance
and disconnect from supply before
changing accessories or approaching
parts that move in use.
Getting started
1. Place the motor base on a dry, level,
stable, surface such as a countertop
or table. Keep it away from the
countertop edge. Be sure to leave
plenty of room around air vents at the
back of the appliance.
Caution! Ensure that the power
cord is unplugged.
KM6xxx_Ultramix Professional_AEG.indd 27
2. The Wire whip, Meat grinder* and
Slicer/Shredder* should only be
washed by hand in warm soapy
water.
The bowl, Flat beater and Dough
hook are dishwasher-proof.
*depending on model
2. Move the bowl support arm down.
Turn the bowl lift handle clockwise until
the bowl support arms are in position.
Warning! Keep fingers and hands
away from areas with movable parts.
3. The housing should only be cleaned
with a soft damp cloth, then dried
with a cloth.
Note: Do not use abrasive cleansers or
scouring pads to clean the surfaces of
your appliance.
3. Position the bowl, using a slight
angle, onto the pins placed on the
bowl support arms.
2016-04-06 15:14:17
D
GR
NL
F
GB
27

Publicité

loading

Ce manuel est également adapté pour:

Ultramix professional km6 serie