GE JGP628 Instructions D'installation page 4

Installation Instructions
PREPARING THE OPENING
[1] MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
13" MAX. Depth of unprotected
overhead cabinets
, | ) 6" MIN. clearance from
cutout to side wall on the
right of the unit
[i
30" MIN. clearance from countertop / ~
to unprotected overhead surface
18" MIN. height
~ from countertop to
nearest cabinet on
either side of unit
ae LBA
3-3/4" MIN. clearance from =
cutout to side wall on the
left of the unit
NOTE: All gas cooktop models require 7/16"
free area below cooktop height to combustible
material.
[4 | RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
1" Min. From Backwall
v
Recommended T A
gas supply
location
a From Cutout
Center Line
[2] OVERALL COOKTOP DIMENSIONS
21" (21-1/4" Max. for
36" Glass Top models}
18-718" pa S116
[3] CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
FR ue wath cut
33-7/8"
77K length ©" 16-15/16" Frag |
2-1/4' Min. Between
cutout and the wall
behind the cooktop / i
2-1/2" Min. from
front edge of cutout
and front edge of
countertop
[5] MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT (UP TO 200°F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must
withstand heat
up to 200°F