GE JGP628 Instructions D'installation page 10

Installation Instructions
COOKTOP BURNERS
base indentations
careful not to push any cooktop controls while the and that they are Burner head
Do not remove the top or touch the electrode them by rotating the
of any burner while another burner is turned on. heads until they are
Electrical shock might result. level,
Replace the burner head onto the burner
base, making sure that the head is properly ,
oriented over the burner base and the Pin base
electrode. Make sure to place Make sure the slot in indentations
the correct burner head on the correct burner the burner head
base and that the burner head sits level on is positioned
the burner base. The burner heads are not over the
interchangeable.
electrode. me
urner cap has P e
Place the burner three to 'our "ety |_| _
caps on the burner By
F
pins. When
stobiity (COE
correct burner
the pins sits
Burner cap properly seated . ve
head. The burner
in the stability
Burner bose
caps are not
chamber.
interchangeable.
Make sure that the
burner caps are
properly seated on
Burner cap
the burner heads. Make sure the hole
Burner cap not properly seated in the burner head
assembly is positioned
over the electrode and
"Burner nead
that the burner head is cssemby 4
fully inserted inside the
burner base. A small
gap between the base
and head is normal.
Electrode Burner
10