Publicité
Les langues disponibles
Les langues disponibles
Before you start
Initial setup
• When you turn on the washer for the first time, the screen shows the initial setup process.
Follow the on-screen instructions to complete it.
• Initial setup will not repeat after you've completed it.
• The initial setup includes language selection, calibration, and a brief tutorial.
• Tap OK or turn the Navigation dial to skip to the next screen.
01 Language selection
Turn dial & Tap OK
03 Tutorial
Let's explore your new washer!
[Tap OK to skip]
Run Calibration (recommended)
• Initial setup includes the calibration process which comes after the language selection. You must
proceed calibration before using the washer.
• Empty the drum, and then tap and hold
• When calibration is complete, power turns off and then turns on automatically.
• If you want to proceed calibration again, tap and hold
select Calibration.
A2-WW6900_WASHER-MD_SimpleUX_03645H-00_EN.indd 29
English(US)
Español
to start calibration.
02 Welcome screen
Welcome!
A washer that knows you!
All Done!
for 3 seconds to enter the system function and
English 29
2022/12/31 11:17:16
Publicité
