Velleman 41022167 Mode D'emploi page 3

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted
municipal waste; it should be taken to a specialized company for recycling. This device should
be returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Read and understand this manual and all safety signs before using this appliance.
This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the device in a safe way and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance shall not be made by children
without supervision.
Indoor use only. Keep this device away from rain, moisture, splashing and
dripping liquids. Never put objects filled with liquids on top of or close to the
device.
Do not use near inflammable products or in explosive atmospheres. Heat can cause
fire to inflammable products even when they are not in sight. Only use in properly
ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot soldering iron as this can cause serious burns.
Keep the tips away from the body, clothes, or other flammable material. Do not
aim the soldering iron at the eyes. Use gloves and/or heat-resistant tools to pick up
the PCB assembly to prevent burns. Always return the irons and gun to their stands
between uses; always let the device cool down after use and before storage.
Place the device on a level, stable, and fire resistant working surface.
Do not inhale solder fumes. The vapours that are released during soldering are
harmful. Therefore, you shall only use the soldering station in well-ventilated areas
or under an exhaust hood (solder fume extractor). Dispose of fume filters and
solder residue in accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece
is cut and capacitors are discharged.
Do not block the blow head. This may cause heat reflection and may damage the
heating element.
Warning! This tool must be placed on a stand when not in use; do not leave the
tool unattended when switched on.
•
Use the soldering iron on a heatproof workbench.
•
Let a hot soldering iron cool down naturally and do not immerse in water.
V. 02 – 01/04/2020
GAS/SET2
USER MANUAL
3 ©Velleman nv