Velp Scientifica MULTISTIRRER 6 DIGITAL Manuel D'instructions page 8

•
Push the knob. Then rotate it to set the run time of the intermittent mode (minutes/seconds).
NNSS
Note: select to disable the function.
•
Push the knob. Then rotate it to set the pause time of the intermittent mode (minutes/seconds).
The stirring function will be interrupted cyclically. The run time and the pause time should both be set.
NNSS
Note: select to disable the function.
•
Push the knob. Then rotate it to set the timer (hours/seconds).
After the timer has elapsed, the stirring will be stopped and the display will show End.
HHnn
Note: select to disable the function.
•
Push the knob or wait 10 seconds to confirm.
Dedicated blinking leds show the active functions.
Note: each function can be set individually or in combination with the others.
8