Velp Scientifica MULTISTIRRER 6 DIGITAL Manuel D'instructions page 6

1. Introduction
MULTISTIRRER Digital is able to stir up to 6 beakers having a maximum diameter of 85 mm (MULTISTIRRER Digital 6) or
up to 15 beakers having a maximum diameter of 64 mm (MULTISTIRRER Digital 15) at the same time.
Thanks to the brushless motors, the stirrer stays cold even after several days of continuous operation
Epoxy painted metal structure, with stainless steel cover, are studied and tested in order to give to the instrument an
excellent resistance to the attack of chemical agents and to corrosion in general.
The stirring speed can be set using the frontal knob within a range of 80 - 1500 rpm.
The stirrer display shows the speed set point.
The instrument is equipped with advanced functions as auto-reverse of the stirring direction, intermittent mode programs
and integrated timer to meet users' workflow and safety lock feature to avoid possible alteration of the working conditions.
NOTE: it's important to choose the most suitable magnetic stirring bar related to the quantity and the liquid to be stirred as
well as to the type of the beaker.
For MULTISTIRRER Digital 6 is suggested the stirring bar A00001056 (6x35 mm); for MULTISTIRRER Digital 15 the
A00001057 (6x20 mm).
2. Installation
•
Unpacking
➢ Check the integrity of the unit after unpacking
•
The box includes
➢ MULTISTIRRER Digital magnetic stirrer
➢ Instruction manual
➢ Plug for power supply
➢ Switching power supply 100-240 V / 12 V
•
Installation
➢ Place the unit on a non-flammable surface
➢ Make sure that the technical specification of the unit and the power supply line are the same
➢ Place the flasks containing the sample and a suitable magnetic stirring bar on the stirring plate
➢ Connect the instrument to an easily accessible socket (compliant with the current safety norms), using only the
provided power supply and dedicated plug
6
EN