Publicité
Les langues disponibles
Les langues disponibles
When selecting a location for your appliance you should make sure the floor is flat and firm,
and the room is well ventilated. An average ambient temperature must be observed. This
temperature is specific according to the climatic class of the device, CA242BF is N-ST. This
refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to
38 °C
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment will be
affected and may cause a malfunction. Once the appliance is placed in its final
location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water
and dry completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your appliance
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it to reach the correct temperature.
Reverse door
Depending on your needs, you can change the opening side of the door. You can choose to
open it from the right or from the left. To change the opening side, follow the instructions.
Warning:
Before changing the opening side of the door, unplug the device from the mains.
Any removed part must be kept until the end of installation.
Do not lay the device down on the floor, you could damage the cooling system.
Get help from one or two more people.
23
Publicité
