Pc - Connection; Application References - PCE HAVER EML 200 digital plus Notice D'utilisation

7. PC – Connection
For data transfer the EML 200 can be connected with a personal computer by its serial interface. A RS 232
cable is not included in delivery.
The serial interface of the EML 200 digital plus for dry sieving is located at the backside of the drive. The
serial interface of the EML 200 digital plus for wet sieving is located at the separate control gear.
This enables the communication to report the analysis with the Haver software analysis or any other
laboratory information and management system (LIMS).

8. Application references

The machine has been constructed according to the actual technical standards and the
recognized safety specifications. Although, there might be dangers for the user or third
persons or impairments of the machine and other goods.
Only use the machine in perfect technical constitution. Follow the operating instructions conscious of safety
and danger. Repair defects at once by authorized and qualified persons!
The machine has exclusively been developed for grain sieving to determine particle distribution. Any other
or further application is not as agreed upon. The manufacturer/supplier will assume no responsibility for
damages as a result of improper use. The risk is on the user's side.
Serial interface at the bottom of the separate control gear.
Page 18/34