Clamping Systems - PCE HAVER EML 200 digital plus Notice D'utilisation

3.2. Clamping systems (according to model)
3.2.1. Classic
Elevation adjustment:
By turning the nut it moves up and down the guide rod.
Tensioning:
The sieve cover has to be installed and both nuts must be screwed down simultaneously.
3.2.2. HAVER TwinNut
Elevation adjustment:
Pull apart the two parts of the nut and slip it on the guide rod up to the sieve cover. Reclose it.
Tensioning:
Tighten the two HAVER TwinNuts simultaneously.
4. Technical data for the EML 200 digital plus
Test sieve shaker with electromagnetic drive and three-dimensional sieving action for dry and wet sieving.
Operation voltage:
Frequency:
Power consumption:
Control:
Weight:
max. weight of full sieve tower:
Dimensions:
Emitted sound:
1.
Nut with handlebars
2.
Sieve cover
3.
Guide rod
1. Nut HAVER TwinNut
2.
Guide rod
3.
Sieve cover
230 Volt or 110 Volt with transformer
50 Hertz / 60 Hertz
approx. 410 Volt-ampere with full charge
all-electronic
34 kg, without test sieves
8,7 kg
345 x 285 x 950 mm (Dept x Width x Height)
The emitted sound of the machine in action has been determined with a comparative
sound measurement according to DIN 45635-01 KI1.
The equivalent continuous sound level A is: L
The intensity of sound can be reduced when using HAVER
Sound absorbing Cupboards.
≤ 70 (dB)
pAeq
Page 16/34