Perel VTBAL500 Mode D'emploi page 5

5.6 Disabling the Auto Switch-Off Function
1. Switch on the scales.
2. Press and hold the tare button, and at the same time press the on-off button 4 or 5 times until
"OFFF" is displayed. Release the buttons. The automatic switch-off function is now disabled.
You can now use the scales without automatic switch off function. The function will reactivate when
switching off the scales. To disable the function, please perform the above steps again.
6. Cleaning and Maintenance
The scales do not need any particular maintenance. However, it is advisable to clean them occasionally to
keep them looking like new.
7. Technical Specifications
material
capacity
resolution
units
dimensions
scales
display
weight
power supply
scales
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 02/01/2020
VTBAL500
ABS
40 kg
5 g
g / kg / oz. / lb. / lb:oz
200 x 200 mm
57 x 30 mm
815 g
2 x AAA batteries (R03, incl.) or 6 VDC, 200 mA power adapter (not incl.)
5 ©Velleman nv