Publicité
Les langues disponibles
Les langues disponibles
Features & Controls
ICON Touch LCD Controls
3. FAN+ BUTTON
►
Press the FAN+ button to increase the fan speeds from off, 1, 2, 3, 4, 5.
CHARCOAL FILTER REMINDER (disabled by default and must be enabled if recirculating hood):
After 200 hours of fan usage, the LCD will scroll through text only when the hood is powered on)
and the FAN+ button will slowly blink, indicating it is time to replace the charcoal filters. If the hood
is not powered on, only the FAN+ button will slowly blink.
►
To enable or disable the charcoal filter reminder, press and hold the FAN+ and LIGHTS button
for 3 seconds while the entire hood is powered off.
►
With the hood off, pressing the FAN+ button will display the instructions to reset the charcoal
filter reminder for a few seconds before reverting back to the scrolling text. Press and hold the
FAN+ button while the entire hood is powered off to reset the charcoal filter reminder.
4. LIGHTS BUTTON
►
Press the LIGHTS button to cycle through the light levels from off, low, and high.
TRUEHUE FEATURE: TrueHue allows you to adjust the color temperature of the lighting from
warmer to cooler. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.
►
To adjust the color temperature of the lights, when the hood is powered off, press and hold the
LIGHTS button for 3 seconds. The LCD will display 3000K. Press FAN+ or FAN- to adjust the
color temperature. While adjusting, the lights will also turn on to match the color temperature
referenced on the LCD. Press the LIGHTS button to confirm the temperature and the lights will
turn off, or wait 10 seconds for automatic confirmation.
20
Siena Use, Care, and Installation Guide
C O R E
S I E N A
WA L L
Publicité
