Carbest Skylight Manuel D'instructions page 4

Roof hood Skylight -
Installation Instruction Manual
31854 | 318540 | 31851 | 318510
01
700 mm
For Sandwich Panel Roof Mark Roof according to
cut out Size of the skylight.
For non-sandwich panel roofs assemble according
to size however leave 3 mm allowance (eg.
700 x 500 mm cut to 703 x 503 mm)
04
Apply generous amount of appropriate adhesive
around the edge of the skylight as per diagram
above.
07
When installing internal blind, remove all light
coverings and connect 12 V wiring for LEDs
REIMO REISEMOBIL-CENTER GMBH · 63329 EGELSBACH · BOSCHRING 10 · GERMANY
WWW.REIMO.COM · MADE IN CHINA ·
02
25 – 60 mm
Prior to installation, roof should be between
25 – 60 mm thick and ensure 12 V cable is wired
to position.
05
1 – 2 mm
Place skylight into position in cut-out ensuring the
hinges face the front of the caravan/rv.
08
Place internal blind into position, then screw into
place before re-fitting coverings.
©
REIMO 08/2023
03
Prior to installation of skylight clean surface
thoroughly with appropriate cleaning agent
06
Insert Brackets provided into skylight slots and
use screws provided depending on thickness of
your roof.
WARNING: Take care not to overtighten as this
can cause skylight to bow which may effect the
operation of the skylight.
NOTE: IF YOU ARE HAVING TROUBLE
UNDERSTANDING THESE INSTALLATION
INSTRUCTIONS PLEASE CONTACT YOUR
LOCAL REPRESENTATIVE FOR FURTHER
ASSISTANCE.
EN