Cafe CGU486 Instructions D'installation page 5

PRODUCT DIMENSIONS AND CLEARANCES FOR 36" MODELS
WARNING
Installations
to combustibles. A custom hood
combustible surfaces must have
installation instructions for specific
hood clearances.
The surface of the entire back
or other stone.
CAUTION
To prevent
drafts from affecting burner
floor under appliance and behind
** As defined in the National Fuel Gas
combustible materials are not part of the
certified by CSA. Clearances less than
12" must be approved by local codes
ADDITIONAL CLEARANCES:
Working areas adjacent to
the rangetop should have 18"
countertop and the bottom of the
back edge of countertop and 3 in.
minimum from cutout to side edges
31-2000816 Rev. 0
Design Information
Front of
Bullnose
Height
48" Minimum
to Combustibles
18" Min.
Back
3" Min.
Island Cutout
Universal Utility Locations
2"
17"
Locate gas
inlet on back
floor 2" from
36" Minimum
12" Minimum
Each Side
36" *
35"
36"
3" Min.
16"
12" Minimum to
Adjacent Wall
8"
a 4" high backsplash
the rangetop to slide
12" Minimum to
Combustibles or 0"
material above the
cooking surface **
48" Min. to
Combustibles
0"
Clearance
5