Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Step 1: Frame Assembly
Select level and suitable location for your shelter.
1. Assembly the two End Ribs
a. Follow Diagram B connecting the 7 tubes
together
(1pc tube #1, 2pcs tube #2, 2pcs tube #3 & 2pcs
Bent Legs #6) to form 1 End Rib.
b. Repeat it to get the other End Rib.
2. Assembly the 5 Center Ribs
a. Follow Diagram C connecting these 7 tubes together
(1pc tube #1, 2pcs tube #2, 2pcs tube #4 & 2pcs tube
#5) to
form 1 Center Rib.
b. Repeat it to get the other 4 Center Ribs.
c. Insert the Center Ribs into the Foot Plate (#12). Align holes
in the pole and foot plate, push the Pin Bolt (#14) through
all the holes, Insert the Cotter Pin (#15) and split the
tongues of the cotter pin with a slot screwdriver to secure
this connection.
Use a rubber or wooden mallet to ensure all
pipes are fully inserted.
3. Attach Side Cross Rails
a. Pick one End Ribs & 4 Tube #7. Follow Diagram D use
part #11 connecting Tube #7 and the End Rib by fittings
(#16, #17 & #18).
Page 5
Diagram B
Diagram C
Diagram D
Publicité
