Publicité
Les langues disponibles
Les langues disponibles
A
Installation without an outdoor opening
Recycling version
Ask your activated carbon filter vendor about transforming the extractor from the evacuation
version to the recycling version.
Install the activated carbon filter (cassette):
• Check that the diameter of the activated carbon filter matches that of the outlet.
• If necessary, remove the pre-fitted diameter adapter.
• Place the activated carbon filter on the outlet, then fix it in place by turning it anti-clockwise.
Install the activated carbon filter (to be cut):
• To install the activated carbon filter, the metal filter must first be removed.
• Open the metal filter, press on the locking mechanism, then pull the filter downwards.
• Place the pre-cut filter above the metal filter. Hold this in position using metal clips (supplied,
depending on the model).
• Replace the metal filter in its original position.
PEASE NOTE:
Ensure that the filter is fixed correctly; if not, it risks coming
loose and causing a danger.
Using the appliance
8
EN
Publicité
