AKASO BRAVE 8 Manuel D'utilisation page 30

EN
Once your camera is successfully paired with the remote, you can remotely control
your camera to take photos, record videos and more using the remote. Below you
will find a list of operating instructions for using the remote control.
1. Power on or off / Pair
Function
Power on
Pair
Power off
2. Use the shutter button
Operation
Function
Status
Record
Video Mode
videos
On
Take Photo Mode
photos On
Operation
Operation
Status
Off Press the
Power button
Pairing Press Mode
and Shutter
buttons
On Press the
Power button
Operation
Press the
Shutter button
Press the
Shutter button
Detail
Press the Power button to turn on
the remote control. The red and blue
indicators on the remote will be
flashing quickly.
1. Enable the Remote feature on the
camera. To do this, swipe down to
access the quick menu and locate
"Remote", then turn on the remote
feature by using the slide switch.
2. Press and hold the remote's Mode
and Shutter buttons at the same
time till its screen displays the date.
The two indicators will stop flashing.
Now the remote is successfully
connected to your camera.
Warm tip: The remote will be
automatically connected to the
camera in your second use.
Press the Power button again to turn
off the remote control.
Detail
Press the Shutter button to start recording.
Press again to stop recording.
Press the Shutter button to take a
photo.
27