Publicité
Les langues disponibles
Les langues disponibles
Replacement Parts
Contact the factory for spare parts availability and part numbers. Typical spare parts are listed below. Due to certification,
certain component parts are not available for field replacement. Units with this type of damage must be either replaced
entirely or returned to Federal Signal for service.
Description
70 V
, Loudspeaker Kit
RMS
(Includes PCBAs, Bracket, Driver, & Mounting Screws)
100 V
Loudspeaker Kit
RMS
(Includes PCBAs, Bracket, Driver, & Mounting Screws)
Description
Indicator Ring/Legend Kit, Black
Indicator Ring/Legend Kit, Blue
Indicator Ring/Legend Kit, Green
Indicator Ring/Legend Kit, Magenta
Indicator Ring/Legend Kit, Red
Indicator Ring/Legend Kit, Yellow
E-Box Endcap with M20 Opening
E-Box Endcap with M25 Opening
E-Box Cover Assembly (Includes two terminal blocks, mounting plate, retention hardware)
In-Line E-Box Coupler Kit
90-Degree E-Box Coupler Kit
Extension Box Spacer Kit
Single Trunnion Kit
Dual Trunnion Kit
Adapter, M20 Male to 1/2" Female NPT
Adapter, M20 Male to 3/4" Female NPT
15 W Audible Acoustic Insert
Table 4 Choosing cable-entry devices for Equipment in Potentially Explosive Atmospheres
Models Ex
G-SPK-XXX-D
(Ex db surface mount)
G-SPK-XXX-E
(Ex db e surface mount)
G-SPK-XXX-D
(Ex db surface mount)
G-SPK-XXX-E
(Ex db e surface mount)
Federal Signal signaling.fedsig.com
Table 2 Replacement Part
Table 3 Accessories
Atmospheres Cable Entry Devices (cable glands, stopping plugs, etc.)
Gas
Cable entry devices shall be equipment certified as flameproof. To maintain
the ingress protection of the flameproof loludspeaker enclosure, we
recommend the cable entry device be IP66 certified.
Gas
For the flameproof loudspeaker enclosure, cable entry devices shall be
equipment certified as flameproof. To maintain the ingress protection of the
flameproof loudspeaker enclosure, we recommend the cable entry device be
IP66 certified. For the increased safety terminal enclosures (terminal boxes),
cable entry devices shall be equipment certified as increased safety and shall
maintain an IP rating of IP54.
Dust
Cable entry devices for the terminal enclosures shall be equipment certified
as dust protected. To maintain the ingress protection of the loudspeaker and
terminal enclosures, the cable entry devices shall be IP6X certified.
Part Number
K859501405-070
K859501405-100
Part Number
G-KIT-RP-BK
G-KIT-RP-B
G-KIT-RP-G
G-KIT-RP-M
G-KIT-RP-R
G-KIT-RP-Y
K859500805-02
K859500805-01
K859501414
G-KIT-EC180
G-KIT-EC90
G-KIT-EXTB
G-KIT-ST
G-KIT-DT
K231246A
K231247
G-KIT-15WINSERT
11
Publicité
