Publicité
Les langues disponibles
Les langues disponibles
V1.1
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Ensure to properly ground all tools.
4.
Remove adjusting keys and wrenches.
5.
Keep extensions within safe operating limits.
6.
Line up support rollers with drill press table surface before use.
7.
Use additional support(s) if workpiece exceeds the weight limits of
this unit or makes the drill press unstable or when working with
long pieces.
8.
Test the set-up for stability and safety before proceeding with
the work.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Tools needed: (2) 1/2" wrenches, flat-head screwdriver or putty knife.
1.
Unpack and make certain all parts and hardware are included and are
not damaged from shipment.
2.
Using the wrenches, install column clamps strap (#1) and column
clamp/adapter (#2). Use the 5/16 in. column anchor bolts (#7), 5/16-18
lock nut (#8) and the large threaded hand knob (#9) to secure these
parts. Adjust the clamp bolts/nuts so that the clamp bolts are
equally spaced.
Visit www.princessauto.com for more information
Drill Press Roller Attachment
9027921
5
Publicité
