DoorBird D410 Manuel D'installation page 11

7
ACTIVATING THE DEVICE
Switch on the power leading to the assembly location.
If you use the power supply unit (mains adapter) to power the device, plug it into a wall socket. If you use PoE to
power the device, make sure to switch on power of the PoE-Switch / PoE-Injector that you have connected the
device to.
Do not power the device simultaneously via the power supply from the power supply unit (mains
NOT IC E
adapter) and the power supply via PoE.
You can see if the device receives power by checking the PWR-LED, which lights up after the device gets
connected to power. The device is ready for operation (booting up process, any software updates, etc.) once the
LCD display shows the network status. This may last for up to 5 minutes. If the PWR LED does not light up, please
check the power supply. When using a wall-plug power supply and not PoE please check whether you have
connected the positive pole and negative pole to the device correctly.
8
CONFIGURE THE DEVICE VIA DOORBIRD APP
Download the DoorBird App by Bird Home Automation onto your mobile device from the Apple App Store or
Google Play Store. You can always find the most up-to-date version of the App manual on
www.doorbird.com/support.
Make sure that the DoorBird device you want to configure is online: www.doorbird.com/checkonline
If the device is not online, please check the network connection again.
Settings
If you have connected the device to the Internet, go to the DoorBird App →
code icon in the "User" field. Scan the user QR code found on the "Digital Passport" provided with the device.
Settings
DEVICES
DEVICES
ghehpf 0001
front door
ghehpf 0001
front door
abcdef 0002
abcdef 0002
office
office
APP SETTINGS
APP SETTINGS
Hands-free mode
Hands-free mode
PWR LED LAN only mode
LAN only mode
You can see if the device receives power by checking
App security
the PWR LED. The PWR LED lights up about 30 to 60
seconds after the device get connected to power and
App security
stays on for 5 minutes. For the connection status of
FURTHER FUNCTIONALITY
the device, please check the status display on the
top. If the PWR LED does not light up, please check
Administration
FURTHER FUNCTIONALITY
WiFi Setup
Administration
WiFi Setup
Add
Add
Settings
USER
USER
User
User
PASSWORD
PASSWORD
Password
Password
NAME (COMMENT)
Device (comment)
NAME (COMMENT)
the power supply. In case of PoE, make sure to use a
Device (comment)
compatible PoE device (https://www.doorbird.com/
poe). When using a wall-plug power supply and
not PoE, please check whether you have connected
the positive pole and negative pole to the device
correctly.
Save
→ "Add" and click on the QR
Settings Save
11