Publicité
Les langues disponibles
Les langues disponibles
•
Sufficient air is needed for proper
combustion and exhaustion of
gases to avoid back-drafting. Follow
the heating equipment
manufacturer's guidelines and
safety standards, such as those
published by the National Fire
Protection Association (NFPA), the
American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and local
municipal code guidelines.
•
Do not connect the appliance to
flues (from boilers, fireplaces, etc.).
Make sure the mains voltage
corresponds to the values on the
rating plate located inside the range
hood.
•
Old ductwork should be cleaned or
replaced before installation to avoid
the possibility of a grease fire.
•
To ensure the installation process
is carried out safely and without
causing harm to the product or
oneself, it is necessary for two
individuals to participate in the
installation of range hoods due to
their weight and size.
•
Before performing any cleaning or
maintenance operations, disconnect
streamlinebath.com
the range hood by unplugging it or
using the main switch.
•
Ensure that there is adequate
ventilation in the room when the
range hood is used at the same time
as appliances burning gas or other
flues.
•
The exhaust air must not be
discharged into a flue that is used
for exhausting fumes from
appliances burning gas or other
fuels.
•
Before servicing or cleaning the
range hood, make sure to turn the
power off.
•
Repairs performed by unqualified
persons may cause damage. For all
questions on repairs and other work
on the appliance, please contact
Streamline at
support@streamlinebath.com
support@streamlinebath.com
310-935-0028
or
(310) 935-0028
6
Publicité
