Streamline WALL MOUNT RANGE HOOD Serie Manuel Du Propriétaire Et Guide D'installation page 18

9.
If using the cutout template that came with the range hood, use it to
mark the location of the mounting bracket by lining up the template
with the 2 previously marked lines.
Affix the template to the wall using tape. Make sure to align the
centerline and bottom of the template with the corresponding
markings on the wall for the range hood. Use a pencil to trace and mark
the position of the mounting bracket.
If using the range hood unit to determine the placement of the
mounting bracket on the wall, find the mounting holes on the back of
the range hood.
Center the range hood along the previous horizontal and vertical
marked lines to mark the position of the mounting holes. This is where
the mounting bracket will attach. Ensure that the marking is level
relative to the prior horizontal and vertical centerlines on the wall.
streamlinebath.com
Tape
support@streamlinebath.com
Mounting
Template
(310) 935-0028
18