Streamline WALL MOUNT RANGE HOOD Serie Manuel Du Propriétaire Et Guide D'installation page 46

3.
Take one filter and attach it to the motor. Rotate and twist it clockwise
until it locks in place. If your range hood model calls for two filters to be
installed, then the filters should be installed on each side. Repeat the
previous step by taking another charcoal filter and attaching it to the
other side of the motor. Rotate and twist it clockwise until it locks in
place.
Left Filter
Right Filter
4.
To replace the filter, rotate it counterclockwise and then remove it. After
that, install the new charcoal filter and twist it clockwise to lock it in
place.
5.
Ensure that the charcoal filter is correctly locked in place to prevent any
abnormal noise or potential danger.
streamlinebath.com support@streamlinebath.com
46
(310) 935-0028