Craftsman 486.24100 Manuel Du Propriétaire page 4

ASSEMBLY iNSTRUCTiONS FOR MODEL 247/459 TRACTORS
IFYOUR TRACTOR DRAWBAR HAS SHOULDER
BOLTS:
1.
Place the second notch in top of weight bracket arm (2a) onto
shoulder bolt in side of drawbar. Secure bottom of arm to
drawbar using a 3/8-16 x 1" hex bolt (3), a 3/8" lock washer
(10) and a 3/8-16 hex nut (12). Repeat on other side. See
figure 4.
12
10
SHOULDER
BOLTS
IFYOUR TRACTOR DRAWBAR DOES NOT HAVE
SHOULDER BOLTS:
1. Attach both weight bracket arms (2b) to drawbar using four
5/16" x 3/4" hex bolts. See figure 6.
FIGURE 4
FIGURE 6
2.
3.
Assemble the weight bracket (1) to weight bracket arms (2a)
using four 3/8-16 x 1" hex bolts (3), 3/8" lock washers (10) and
3/8-16 hex nuts (12). See figure 4.
Assemble wheel weight to weight bracket (1) using two 1/2" x
5-1/2" hex bolts (15), 1" O.D. washers (5), 1/2" lock washers
(9) and 1/2-13 hex nuts (11). Tighten securely. See figure 4.
2.
3.
Assemble the weight bracket (1) to weight bracket arms (2b)
using four 3/8-16 x 1" hex bolts (3), 3/8" lock washers (10) and
3/8-16 hex nuts (12). See figure 4.
Assemble wheel weight to weight bracket (1) using two 1/2" x
5-1/2" hex bolts (15), 1" O.D. washers (5), 1/2" lock washers
(9) and 1/2-13 hex nuts (11). Tighten securely. See figure 7.
15
12
10
FIGURE 5
15
s
y-
12
11 lO
FIGURE 7