Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY iNSTRUCTiONS
FOR MODEL 917/944 TRACTORS
iFYOU
HAVE THiS STYLE
DRAWBAR:
1.
Assemble two 1.5" O.D. washers (8) onto two 3/8-16 x 1" hex
bolts (3). Insert bolts through drawbar and assemble weight
bracket (1) onto bolts. Fasten securely with two 3/8" lock
washers (10) and two 3/8-16 hex nuts (12). See figure 1.
2.
Assemble wheel weight to weight bracket (1) using two 1/2" x
5-1/2" hex bolts (15), 1" O.D. washers (5), 1/2" lock washers
(9) and 1/2-13 hex nuts (11). Tighten securely. See figure 1.
lO.,#'
_
F
3
L_
_." t-_,_.._
, _
,
\ ..........
_V'_",_ 15
FIGURE 1
Use figure
3A for most
tractors
with this
style
drawbar.
Use figure
3B if the weight
bracket
interferes
with
the gas tank.
5.
Assemble weight bracket (1) to weight bracket arms (2a) using
four 3/8-16 x 1" hex bolts (3), 3/8" lock washers (10) and 3/8-
16 hex nuts (12). See figure 3.
6.
Assemble wheel weight to weight bracket (1) using two 1/2" x
5-1/2" hex bolts (15), 1" O.D. washers (5), 1/2" lock washers
(9) and 1/2-13 hex nuts (11). Tighten securely. See figure 3.
15
11
12
10
3
FIGURE 3A
IFYOU
HAVE THiS STYLE
DRAWBAR:
3.
Assemble bottom of two weight bracket arms (2a) to sides of
drawbar using two 3/8-16 x 1" hex bolts (3), 3/8" lock washers
(10) and 3/8-16 hex nuts (12). See figure 2.
4.
Assemble top of two weight bracket arms (2a) to sides of
drawbar using front notches in arms. Use two 5/16-18 x 1-1/4"
hex bolts (4), step bushings (14), 5/16" washers (6) and 5/16"
lock nuts (13). See figure 2.
13
14
10 /
3
15
wo holes
10
12
9
11
3
FIGURE 3B
FIGURE 2
3
Publicité
