Hercules DJCONTROL INPULSE T7 Mode D'emploi page 99

9. How can I connect the DJControl
Inpulse T7 controller to a USB-C
port, or a Thunderbolt 3 port?
You can connect the DJControl Inpulse T7 controller to a
USB-C port or a Thunderbolt 3 port in three different
ways:
− By using an adapter (USB-C [male] or Thunderbolt 3
to USB-A [female]) between the computer and the DJ
controller. Please note that some low-cost adapters
will not work properly, as they cut off a part of the
power supply.
− By using a dock (USB-C or Thunderbolt 3) between
the computer and the DJ controller. Make sure that
the dock has a dedicated power supply, as a dock
powered only via the USB-C or Thunderbolt 3 port
may not have enough power.
− By replacing the included USB cable with a USB-C
or Thunderbolt 3 to USB-B 2.0 cable.
98