Bimar FD-40M Notice D'instructions page 13

1) Insert rod (4) into the base (3) and counterweight (2), inserting it into its seat, and lock it
with the "L" screw and washer (1).
2) Extend the adjustable rod (6) to the desired height and secure by tightening the fixing rod
fastening screw (5).
3) Place the motor housing (11) on the adjustable column
a.Insert the
retaining screw
(21) into its seat,
the label "F" on
the column must
be at the front
b. Tighten the locking
screw (7)
"L" screws
1)
2) Counterweight
3) Base
4) Fixed rod
5) Rod fastening screw
6) Adjustable rod
7) Safety screws
8) Nut with retaining screw grip
9) Cord
10) Clutch screw (up / down)
11) Motor housing
12) Oscillation button
13) Switch
14) Screw with nut
15) Front grill/protective screen
16) Fan
17) Fan fixing screw
18) Rear grill fixing screws
19) Rear grill
20) Motor shaft
21) Round-head retaining screw
c.Lock the retaining
screw with grip nut
(8)
13/32
d.Tighten the
clutch screw (up /
down)